Where do you store your Type 2 charging cable?
If you own an EV, you know the problem: the charging cable always ends up in a heap on the garage floor. It gets dirty, can be stepped on, and the connector is exposed to dust and moisture. A Type 2 charging cable is a significant investment — it's worth protecting properly.
Here are 5 ways to store your Type 2 charging cable, from the cheapest to the most well-thought-out solution.
1. Hook on the wall (cheap, but a bad idea)
The classic approach: a large S-hook or plastic holder screwed to the wall, with the cable hung like a bike chain. Costs next to nothing, but comes with real downsides:
- The cable's weight constantly pulls on the connector = wear on internal contacts
- The connector hangs exposed, collecting dust and moisture
- Looks disorganised
- Bend stress on the cable at the hanging point
When it makes sense:
As a temporary solution for occasional use — if you only charge while on holiday or at a friend's place.
2. Cable box with auto-retract (overkill)
Large plastic boxes with automatic cable retraction. Marketed as a "premium" solution. They work, but they're overkill for most people:
- Takes up a lot of space
- The mechanism can break (expensive to repair)
- Only really necessary if you have 5+ metres of cable that's regularly rolled in and out
When it makes sense:
For three-phase 32A cables over 7.5 metres, which are hard to coil manually. For standard 16–22A cables, it's overkill.
3. Braided cable sleeve (cosmetic only)
Sleeved textile netting pulled over the cable to make it look "tidier". Protects against light abrasion, but:
- Doesn't solve the storage problem — the cable still ends up on the floor
- Traps moisture and dirt against the cable
- Hides any damage that may develop
When it makes sense:
If you have a new cable and want to keep it looking good. Best combined with a proper holder.
4. Wall-mounted cable holder with plug socket (smart solution)
The optimal balance between price and function: a compact holder screwed to the wall next to your wallbox, with a form-fitted recess that holds the Type 2 connector securely.
Here's how it works:
- The connector clicks into a precisely shaped recess — protected from dust
- The cable coils around the holder — no kinking, no weight on the connector
- The plug socket is sufficiently IP-rated for indoor/carport use
- Takes up less wall space than a book
Our Type 2 EV Cable Holder is exactly this solution. Printed in PETG (UV-resistant), fits all Type 2 / IEC 62196 cables, and mounts with 3 screws.
5. Cable holder + dedicated cable cleaning (premium)
If you really want to protect your cable: combine a wall holder with a regular cable clean every 3 months. A dry cloth with isopropyl alcohol removes dirt from the connector contacts.
Together, this significantly extends the cable's lifespan — typically 8–10 years instead of 4–5 years with floor storage.
Which option suits you?
| Use case | Best solution |
|---|---|
| Daily home charging | Wall-mounted cable holder |
| Occasional use | Hook on the wall (but consider a cable holder anyway) |
| 32A three-phase with a long cable | Cable box with auto-retract |
| Carport or outdoor installation | Wall holder + cable cover |
| Clean aesthetics | Wall holder in white or black to match the wall colour |
Compatibility — fits all EU electric vehicles
Type 2 (IEC 62196) is the European standard. A wall-mounted Type 2 holder works with all of these brands:
- Tesla Model 3, Model Y, Model S, Model X (European versions)
- Volkswagen ID.3, ID.4, ID.5, ID.7, ID. Buzz
- Volvo, Polestar, BMW, Mercedes-Benz EVs
- Audi e-tron, Q4 e-tron, Q8 e-tron
- Hyundai, Kia, Renault, Peugeot, Citroën EVs
- Skoda Enyaq, Cupra Born, MG, BYD
The holder fits the cable — not the car. So no matter which EV you drive, it's the Type 2 connector on the cable that sets the standard.
What should you look for when choosing?
- Plug socket fit: The holder should have a form-fitted recess that matches the Type 2 connector precisely. Generic plastic holders don't offer the same protection.
- Material: PETG or ABS is best — UV-resistant and holds its shape in both cold and heat. Standard PLA becomes brittle in frost.
- Mounting: Must be screwable into brick or stud. Adhesive solutions won't hold up to the cable's weight.
- Cable guidance: The design should naturally guide the cable into a neat coil — not a flat spiral that puts pressure on the connector.
Conclusion
The simplest upgrade you can make to your wallbox setup is adding a proper cable holder. It takes 10 minutes to install, costs a fraction of a replacement cable, and prevents the most common form of cable damage.
→ View the Type 2 EV Cable Holder
Made in our own workshop, fits all Type 2 / IEC 62196 cables. Dispatched within 1–3 business days.
